Cape Breton's Magazine

> Issue 12 > Page 26 - Glace Bay Makes a Cannon for Louisbourg

Page 26 - Glace Bay Makes a Cannon for Louisbourg

Published by Ronald Caplan on 1975/12/1 (1205 reads)
 

all directions. I allow for the shrinkage of the metal in the core box*" The com? pleted pattern (really a beautiful object in itself) is moved from the shop to the foundry and painted with corewash* The pattern is made in two parts, each known as a half pattern* And the core box • the mold box • cast iron walls without a top or bottom • is also in two parts: the top part is known as the C'pe, and the bottom part is called the Drag* A floor of plank is put down and on it they sit the drag* A half pattern is placed on the plank and sand is shoveled in and rammed down until the Drag can hold no more* The sand con? tains oils and compounds to give it substance. The Drag is turned over (planks up) and the boards are removed, revealing the half pattern snug in sand* The other half of the pattern is fitted on and the walls of the Ck>pe are set on the Drag • and more sand is shoveled in* Roy Paglicia, Foreman, told us: "They are not separate molds • the Cope and the Drag* The Cope section is set on the Drag section • the wooden pat? tern remains* There are bars • called gaggers • all the way along help hold the sand in, because this Ck>pe section is going to be lifted 2 or 3 times* Gaggers are made out of about 1/2 inch square steel • and that goes down into that Ck??pe • right down almost touching the bottom, touching the top of the Drag. Well, vrtien the Cope lifts that rod helps to lift the sand too* We take the Ck>pe and turn it upside down and put it on the flatcar • and then we rap this pattern, back and forth, with a bar and hammer • just tap it loose so we can take it out of the sand* Ihe Drag is still on the floor, and we take the pattern out of the Drag the same way* So there you have your mold* So then we get a goulac • that is molasses water • and spray the Cope and Drag molds with this* That gives us a hardfaced finish* Ihen we get the corewash • Black Donald Corewash • I don't know why it's called that • it gives a smooth finish and prevents molten iron from eating into the sand • we spray the Cope and the Drag, and then it*8 put in to be baked*" i. The Huides on each side carry ' hot iron down into the Drag;the Barrel-core rests m the center. The Ck)pe and Drag are moved on the flatcar into the oven, a brick room with a coke fire burning in the corner* It will bake through the night* In the morning the flat- car is withdrawn* The Drag is shifted to the floor and sand is air-rammed around it Radiator & Cylinder Heads CAPE BRETON AUTO RADIATOR PHONE 564-6362 339 Rear Welton Street Svdney, N.S. Cape Breton's Magazine/26 J. W Stephens Limited lUILDERS SUPPLIfS HARDWARI AND PAINTS WOODWORKERS AND MIU WORK Phoiie the Lumber Number 564-5554 Syclr *y , fXoVd' Scotid' A member of the BOLD organization
Cape Breton's Magazine
  View this article in PDF format Print article



Adobe Acrobat Reader is required to the PDF version of this content. Click here to download and install the Acrobat plugin
Acrobat Reader Download